N0MBM
| Joined: | Sat, May 30th 2015, 16:16 | Roles: | N/A | Moderates: | N/A |
Latest Topics
| Topic | Created | Posts | Views | Last Activity |
|---|---|---|---|---|
| Mini-Din cable issue | Jun 20th 2016, 01:13 | 3 | 5,631 | on 5/7/16 |
Latest Posts
| Topic | Author | Posted On |
|---|---|---|
| Mini-Din cable issue | N0MBM | on 4/7/16 |
| Since there has been no recommendations/input provided I will go ahead and try it and post if it causes any damage to my radios, Wires-X or Signalinlk boxes. | ||
| Mini-Din cable issue | N0MBM | on 20/6/16 |
| Issue: Having to plug-in and unplug mini Din Cables while switching from signalink, wires-x and programming cable. Concerned with breaking/wearing out the connector on the radio. Proposed fix: wire the USBs from signalink, wires-x and programming cable to USBs mounted to the side of the box. Take the mini din cables and combine them into one mini din using a circuit board and run one mini din cable from the circuit board to the radio. Benefit: Will not have to unplug and plug-in different cables when switching between signalink, wires-x and programming cable. I would plug in the USB from the Laptop to the appropriate USB on the side of the box to power the signalink, wires-x or program the radio. Question: Will this cause back-feed to other components causing issues. Example: if I plug the laptop into the USB connected to the signalink, will it send power/signals to the wires-x box and cause a problem with the radio. I have a wiring diagram that shows what I am talking about. Send me an Email and I will reply with it. |
||
