AE7TO
| Joined: | Fri, Apr 20th 2012, 06:10 | Roles: | N/A | Moderates: | N/A |
Latest Topics
| Topic | Created | Posts | Views | Last Activity |
|---|---|---|---|---|
| Will use of ALC pin on IC-635 for RF power control cause distortion? | Aug 1st 2014, 21:00 | 1 | 5,482 | on 1/8/14 |
Latest Posts
| Topic | Author | Posted On |
|---|---|---|
| Will use of ALC pin on IC-635 for RF power control cause distortion? | AE7TO | on 1/8/14 |
| I would like to control my ICOM IC-735 remotely, mostly for digital modes. Unfortunately, this radio's early CI-V interface does not allow for computer control of RF transmit power. So I have assembled an external box with a microprocessor and relays for applying negative DC voltage to the ALC pin on my rig's ACC2 connector whenever I send the appropriate commands from a remote computer. My initial tests into a dummy load indicate that the whole setup works as intended. I leave the IC-735's RF Power slider on 100 watts and I can reduce actual output power to 10 or 50 watts by applying negative voltages to the ALC pin. My question is this: Will this approach distort my signal (e.g. IMD or splatter) when transmitting JT65 or PSK31? I know that we don't want audio input levels so high that ALC kicks in. But I don't have a sense for whether artificially reducing power output via the ALC pin would have similar consequences. The signal looks ugly on a co-located SDR receiver. But I suspect that is because I am overloading the receiver. 73. Mark, AE7TO |
||
